Fishing tricks and homemade products: interesting ideas and recommendations. DIY fishing gear for summer fishing DIY winter fishing crafts

An oscillating spoon is well suited for summer fishing - it is a metal plate, which, thanks to its design, can make movements in a certain rhythm, which attracts fish.

A rotating spoon is no less effective - during the retrieve, the rod begins to rotate, attracting fish with its movements. There are also acoustic spoons - they are very effective because fish are sensitive to sounds.

The simplest ones are simply made from two plates, which create a ringing sound when they touch. The Devon spinner, in turn, imitates a fast fish. Its only serious drawback is that it constantly twists the line. Non-snagging spinners are also known - they are used mainly to avoid snagging.

You can also make a spinner yourself - there is nothing complicated about it, and the result is many times superior to mass stamping. It’s not for nothing that most professional fishermen make their own lures. First you need to choose a material - any metal will do.

Although it is better to avoid aluminum - it plays very poorly. The plate must be free of nicks, rust, etc. - thickness from half a millimeter to eight tenths. A large spinner can reach one and a half millimeters. After cutting out the shape, the plate is sanded and leveled.

After testing for play and catch, the spinners are manufactured according to this option. Before use, it would be a good idea to sand the metal with felt or felt - you can use blade mastic or crocus as a lubricant.

Feeders

Fish feeders have been made for many years - with the development of technology, more and more new types are appearing, and they are constantly being improved. The advantage of feeders is that you can cast them quite far, thus counting on large fish, as well as a good result and the absence of a snag.

Today, feeder feeders and carp feeders are made - the former are much more universal, and the latter are used mainly for carp, since they are larger.

You can also divide feeders into types according to shape - square, oval, spring, etc. The choice is wide - the main thing is to decide in advance where the feeders will be used.

In addition, they are made open and closed - the latter are suitable for animal feed, and the former for vegetable and cereals.

The materials used to make feeders are different - plastic is cheaper, but it is short-lived, but metal will last longer, especially if it is coated with an anti-corrosion compound, although such feeders are not cheap.

You can make a feeder yourself - also from plastic or metal. The first can be made from a plastic bottle - the neck and bottom are cut off from it, and the cylinder is cut across. The plastic sheet should be about 6 by 12-13 cm in size. The hole points are marked on the plastic sheet, at a distance of about two centimeters.

The cylinder is closed with an overlap and fastened with paper clips. Afterwards, the holes themselves are burned out - they can also be punched with a hole punch or drilled. When the base is ready, you need to cover the joint with a lead strip and put a fastening unit on one end - after this the plate is compressed at both ends.

A metal feeder is more difficult to make and requires a lot of materials and tools.

Floats

Floats have been used for a long time, since they are the ones that signal when a fish is biting. Today, goose feathers have been replaced by modern, high-tech models, but their essence has remained unchanged. For fly fishing rods, light floats with a small weight are used - they allow you to notice even the slightest movement.

For match and Bolognese fishing rods, “wagglers” are usually used. For deep fishing, you need a float with a blind mount, and if the depth exceeds the length of the fishing rod, then the mount must be sliding. During plug fishing, ultra-sensitive, carp and flat floats are used.

To make a float at home, you need to have some equipment and materials. It is best to make several floats at a time - it just saves time.

So, one float shape can be made in different sizes. You need to make a blank with a jigsaw or knife.

It is best to leave a length margin of a centimeter or one and a half, and a thickness of 3-4 mm.

To find the center, draw diagonals at the ends. For the keel, steel wire is used, which must be tinned.

In the center at the end you need to insert the keel a centimeter, maybe one and a half.

After checking, dip the keel in epoxy glue and put it back in place. When everything is dry, the workpiece is shaped into a float - the edges of the main cylinder are cut off, and a smaller cylinder is made on the side opposite the keel.

Next, the workpiece is given its final shape, followed by grinding. A float ring is made from thin wire, leaving 5-7 mm ends. An antenna 3-5 cm in size is made from the same wire from which the keel was made and glued in place of the cut thin cylinder. The ring is glued just below the top of the float.

Afterwards, you just need to paint the float - for greater brightness of the antenna, you can use wire casings (preferably white). The paints should be waterproof, and they should not be applied in a very thick layer. It will take a day or two for the float to dry.

Mugs

Since we do not produce high-quality mugs, it is best to use homemade mugs. To make such a device, you first need to cut out a shape from foam plastic and sand it with sandpaper. In the center of the workpiece you need to drill a hole one and a half centimeters in diameter, into which a sleeve with its own hole, but already 8-9 mm, is inserted.

The bottom side of the disk should be painted with white paint, and the top side with red paint. The mast should be made of coniferous wood in the form of a truncated cone.

It will be fifteen centimeters long, with a diameter of 6 to 12 mm from top to butt.

Since coniferous trees are quite soft, no equipment is needed - just a simple knife.

The keel head is more difficult - you need a lathe here, since its shape should be like that of an egg.

If all the work is done on a machine, then the mast will generally be smooth and even.

A blind hole is made in the keel head, which is necessary to insert the mast head there - for good fastening, it is filled with epoxy resin. The last thing left is to equip the circle.

It is better to make the main line from a nylon cord with a cross-section of half a millimeter. The length is determined individually - several meters longer than the deepest place in the intended fishing spot.

Fishing rods

It is much more difficult to make a spinning rod yourself, but it is generally a professional device for fishing. The fishing rod here is made of cork or wood, but plastic can also be used.

In addition, you definitely need a reel - long distance is important for spinning, and without a reel you won’t be able to pull the fish out of there. The fishing line is attached along the entire length of the rod, and is already released behind it - a bait for predatory fish species is suspended at the end.

Snaps

Today there are many baits, and even more types of equipment.

The classic equipment is a weight-head and a hook soldered into it. The weight can be of different shapes - a ball or an ellipse, a rugby or a hoof.

It is not difficult to make such a bait at home, although it will require some skill and special equipment - you need to grind out a weight and solder a small ring and a hook to it. Actually, this is all that is needed to make classic equipment.

Hinged mounting means that there are two fastenings on the weight - one for the main line and hook, and the other for the offset hook and bait.

Making this is only a little more difficult than classic equipment - you just need to solder an additional fastener.

Nods

For summer fishing, side nods are best suited. They are not made at all factories, and therefore they are available mainly in large cities - for other settlements only hand-made production is suitable.

First, you need to cut a thin sliver from the knee of the telescopic rod - the length should be at least 15 cm. The sliver must be cleaned and sanded with sandpaper.

Afterwards, a ring is made from the wire with one end several centimeters in length - the end should extend from the ring at a right angle.

In addition, you can put a heat tube on the nod and melt it - this way there is no need to paint it, and also test for flexibility.

How to catch more fish?

1. . Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates its appetite. It’s a pity that Rosprirodnadzor wants to impose a ban on its sale.
2. More sensitive gear. Reviews and instructions for other types of gear can be found on the pages of my website.
3. Lures using pheromones.

Homemade boats

The boat is well suited for relaxing fishing, but not everyone can afford to buy such a device - but there is a way out. You can make a boat with your own hands. It is best to make such a boat from wood - this way you can even make it large enough for two.

The materials you will need are ash and five-millimeter plywood. First you need to make the frames and keel.

The latter is best made from one board, but you can glue two together, although this will make the boat not so strong. The frames are wedged in the grooves of the keel, and the bottom of the boat is fitted to them.

The assembly of the frame ends with the fastening of two more slats - not screws to the right and left of the longitudinal one.

The next stage involves turning the boat over on the trestles. The frames are processed with a rasp so that they fit snugly against the curved rail being pressed.

The skin pieces are cut out of plywood and attached to the boat using a generous amount of epoxy glue.

In addition, fairly large clamps also facilitate fastening. Each component must be planed so that the next one fits as tightly as possible - any remaining glue that is not used for fastening must be removed with a linen rag soaked in acetone.

Afterwards, the fastening of the remaining parts begins - the upper strips, the rear part of the boat, fenders, seat supports, breshtuk, brackets, etc.

Fishing knots

In the process of fishing, many types of fishing knots are used - and they are all divided into categories according to their intended purpose. For example, there are knots for hooks and lures, loops, for attaching fishing line to a reel and for tying fishing lines.

For a spatula hook that does not have a knot, a basic fisherman's knot is usually used. For large hooks, use the Dumhof knot. The leash knot is convenient because it does not damage the fishing line.

Many fishermen also use stopper knots to limit the depth of a sliding cast or to control casting distance.

Homemade sprays for summer fishing

You can also combine different scents - for example, by mixing strawberry essence, vanilla and cocoa in water, you need to bring the container to a boil, and then pour it into bottles.

When fishing, it is best to take several types of sprays - who knows what kind of fish will go today? For crucian carp, for example, it is best to use sunflower oil and garlic.

To briefly summarize all of the above, we can say that summer fishing is quite troublesome, but nevertheless brings joy and pleasure. Moreover, almost everything you need can be prepared with your own hands without much difficulty.

How long has it been since you had a really BIG CATCH?

When was the last time you caught dozens of HUGE pike/carp/bream?

We always want to get results from fishing - to catch not three perch, but ten kilogram pikes - what a catch! Each of us dreams of this, but not everyone can do it.

A good catch can be achieved (and we know this) thanks to good bait.

It can be prepared at home or bought in fishing stores. But stores are expensive, and to prepare bait at home, you need to spend a lot of time, and, to be fair, homemade bait does not always work well.

You know that disappointment when you buy bait or prepare it at home and only catch three or four bass?

So maybe it’s time to use a truly working product, the effectiveness of which has been proven both scientifically and in practice on the rivers and ponds of Russia?

It gives the same result that we cannot achieve on our own, especially since it is cheap, which distinguishes it from other means and there is no need to spend time on production - you order it, it’s delivered and you’re good to go!

Of course, it is better to try once than to hear a thousand times. Moreover, now is the season! This is a great bonus when ordering!

Find out more about the bait!

Many fishing enthusiasts devote all their free time to fishing. At the same time, fishermen who are in love with their occupation are engaged in the manufacture of fishing equipment, such as baits, tackles, etc.

During the fishing process, some silicone baits lose part of their bodies, and it is a pity to throw them away after that. If you collect several processed silicones, you can use them to make new working baits.

Manufacturing technology

1. In a prepared container, gypsum is diluted to the state of thick sour cream. After this, old vibrotails or twisters are dipped into the solution to obtain templates; after the plaster has hardened, the baits are removed very carefully so as not to damage the mold. If there are any irregularities, they are smoothed out with a sharp, thin object.
2. The mold prepared in this way is thoroughly greased. The most suitable option is sunflower oil. This is necessary so that the finished product does not stick to the mold during the manufacturing process.
3. All mold filling operations must be performed outdoors or in a well-ventilated area.
4. Old, used silicone products are crushed into pieces and placed in a bowl that is heated on the stove. To prevent the silicone from burning, it must be stirred regularly, and the fire should be at a distance of 15-20 cm from the container with silicone. If you add dyes to silicone, you can get bait of the desired color, and if you add flavoring, it will become edible silicone.
5. The well-heated and thoroughly mixed mass is poured into the mold. If you plan to get a two-color bait, then each new layer is poured after the first layer has dried.
6. After about 15-20 minutes, when the silicone has cooled, the finished bait is removed from the mold, the mold is cleaned, greased with sunflower oil and the process is repeated.

Almost always, when fishing, it is necessary to quickly and efficiently change the bait or modify the equipment by changing the leash or feeder. For these purposes, there is a fastener design that is quite small in size. Making it at home will not be difficult.

Manufacturing technology

1. The following tool is required:
   • wire cutters;
   • round-nosed pliers;
   • tweezers.
2. The basis of the material can be a large stapler from a stapler.
3. The wire is bent with pliers into a shape similar in appearance to a paper clip, but smaller in size.
4. Excess ends are cut off with wire cutters.
5. A cambric of the appropriate size is selected so that it fits freely on the fastener.
6. The size of the cambric should be slightly larger than the fastener, so the excess is cut off.
7. A piece of cambric is put on a fishing line and secured with a knot.
8. Any bait is attached to the other end of the mini-fastener, after which, with effort, the cambric is pulled.
9. Mini clasp, ready to use.

For those who regularly fish from a boat, it will be useful to have a simple but effective feeder. It will come in handy if you have to fish on a river where there is a current. To do this you will need the following elements:

• a piece of plastic sewer pipe;
• two fasteners;
• lead;
• electric drill;
• rope, rivets;
• loop and lock.

A piece of pipe up to 30 cm long is taken and plugs are installed on both sides. One of them is installed solidly, and the other is installed in such a way that it can be easily removed. After this, holes are drilled over the entire surface. A rope is attached to the plug that opens. To prevent the plug from opening on its own, a lock or latch of any design is installed.

On the reverse side, where the plug is rigidly fixed, weights should be secured.

The feeder is lowered to the bottom on a rope and remains there until the end of fishing. Thanks to the drilled holes, the bait is slowly washed out of the feeder, which allows you to keep the fish at the fishing point.

Every spinner wants to have a good, catchy wobbler, but not everyone can afford to buy one. As a rule, wobblers are expensive baits, especially if they are related to well-known manufacturers.

In this regard, some fishermen have mastered, and very successfully, making wobblers at home. This is a very interesting and exciting process that does not require special equipment or tools.

How to make a wobbler

1. To begin with, you should decide on the shape and color of the future bait. To do this, you will have to take up art and draw a sketch of the future wobbler on paper. Regardless of the material of manufacture, the wobbler is made of 2 symmetrical parts. There should be a reinforcing wire running inside them.
2. Foam can also be used as a material for manufacturing, but it is not as durable as wood or plastic. Therefore, having taken the necessary material, they are engaged in the manufacture of blanks.
3. Fastenings for rings and tee hooks are prepared from thin stainless steel. The fasteners are mounted in specially cut out places located on the body of the 2 halves of the bait. the two halves are connected using glue. After the glue has dried, a cut is formed for the front blade, after which it is rigidly attached using the same glue.
4. After this, the wobbler should be adjusted based on personal preferences.
5. Any depressions or voids left on the bait are filled with epoxy resin, after which the bait is sanded and prepared for painting. Painting is also carried out depending on your own imagination.

It’s not at all difficult to make a rotating spoon yourself, if you have at least some skills in working with tools and materials. To make it you will need:

• regular paper clip;
• tee (hook);
• metal plate, 0.5-1 mm thick;
• not a big bead;
• a piece of sheet lead;
• tools: file, pliers, needle files, scissors.

First, on a piece of cardboard you need to draw the shape of a petal for the future bait, after which the drawing is transferred to the metal. Take scissors and carefully cut out a petal from a piece of metal. After this, the cut petal is processed with a file so that there are no burrs. Two holes are drilled along the edges of the petal (one on each edge) and processed with needle files. The places where the holes are drilled must be bent 90 degrees in relation to the petal. Then you need to take the wire and straighten it, and at one of its ends you need to form a loop and secure the tee.

After this, a petal and a bead are put on the same wire, after which a loop is again formed at the end of the wire to attach the fishing line. Moreover, the loop must be made so that it does not interfere with the free rotation of the petal.

The spinner requires adjustment through additional loading. A lead weight is placed between the tee and the petal. Again, everything needs to be calculated correctly so that the load does not interfere with the rotation of the petal. The last stage is painting the petal.

Arriving for fishing, you have to spend a lot of time catching live bait. The fact is that in the summer it is very difficult to store live bait: it quickly dies in any container, and live bait must always be vigorous. A device made from 2 plastic bottles will help solve this problem:

1. Take a 2-liter plastic bottle, the neck of which is cut off in half.
2. After this, the neckline is cut off from the same side at the widest part.
3. The result is a piece that looks like a watering can.
4. The bottom of this bottle is cut off.
5. Take a second bottle and cut off the bottom at a distance of 5-7 cm from the greatest thickness.
6. Finally, the structure is put together. The cut “watering can” is inserted back, but only in reverse, with the thinnest part inward, after which the structure is firmly connected using artificial threads. Take another bottle and put the cut end on the first bottle with a neck.
7. A weight and rope are attached to the trap.

After this, you can place bait in the trap and lower the trap to the bottom of the reservoir. A fish that falls into a trap will no longer be able to get out of it. If you need live bait, you just need to pull the trap out of the water. In order for the fry to always be fresh and lively, the trap must be kept in water for an indefinite period of time.

In winter, the most common tool for catching predators (pike) is girders. It turns out that it can be done quickly and simply:

1. The basis for its manufacture is a PVC sewer pipe, 32 mm thick. The pipe needs to be cut into pieces 10-15 cm in size.
2. It is better to file all uneven areas where the cuts are made.
3. 3 holes should be made in the pipe. Two holes are made on one side, one opposite the other, to install on a tripod, and on the other side one hole is made for the line stopper. Its diameter is 1 mm.
4. A line stopper is formed in the shape of the letter P and threaded through a small hole. The stopper should not limit the free movement of the fishing line.
5. A ring is formed from a fishing line 0.4-0.5 mm thick, which is passed through two holes located opposite each other. This ring will serve as a kind of fastening. The vent is attached to a metal rod firmly driven into the ice.
6. About 10 meters of fishing line is wound onto a piece of pipe.
7. A corresponding weight and a hook, such as a tee, are attached to the end of the fishing line.

The zherlitsa is ready for use at the end of the pipe; red tape should be secured at the point of suspension (attachment), which can serve as a bite indicator.

Making bait for crucian carp

The average crucian carp, which most anglers catch, prefers semolina bait prepared according to a special recipe.

Recipe for making catchable bait for crucian carp:

• Pour water into a bowl, add a couple of drops of flavoring, and bring to a boil.
• Semolina is poured into boiling water with constant stirring. The result should be a homogeneous thick mass.
• The heat is turned off to allow the porridge to cool and steam.
• After reaching room temperature, knead the porridge with your hands to obtain even greater density.
• After this, the porridge is wrapped in several layers of gauze.
• It is not recommended to wrap porridge in plastic.

Balls are molded well from the finished porridge, after which they are placed on a hook.

Recipe for preparing porridge bait using the cold method:

• Water is collected from a reservoir into a suitable container and a little flavor is added.
• After this, semolina is added to the bowl with vigorous stirring.
• As a result of active stirring, a homogeneous mass should be obtained. The readiness of the bait is checked as follows: if you lift the spoon with the porridge up and turn it over, the porridge should remain in the spoon.
• Stirring is stopped and the porridge is left for 10 minutes to swell.
• Finally, you need to take a syringe and fill it with porridge.

The porridge from the syringe is squeezed onto the hook in a spiral so that the tip of the hook is the last to close.

Experienced fishermen construct homemade products for ice fishing, which are often much cheaper and more effective than store-bought products. Fishing stores have a wide selection of different products, but many tackles have flaws that are difficult to correct. For this reason, fishermen make winter fishing rods at home.

1. The most common method is to cut a tablespoon from the handle. To improve catchability, it is recommended to bend the handle slightly. Using a drill you need to make holes for the hooks. If you cut a small piece of metal from the handle, then after processing it will look like bleak, which pikes love.
2. From teaspoons you can make an almost complete copy of the Devon spoon. This allows you to install the bait more firmly so that it does not get lost while fishing.
3. An unusual bimetallic spoon can be made from several metals, such as copper and steel. First you need to take 2 similar pieces of metal, in which holes for rivets are already made. The parts need to be carefully riveted and processed. By stamping, the future lure must be given the desired shape.

The rotating type is made of 2 parts - a petal and a base. When an angler plays with the tackle, the petal rotates near the base, luring fish. Manufacturing process:

1. The petal pinwheel is made from round or oval-shaped pieces of metal. The ends of the parts need to be carefully processed, given an elongated shape and slightly twisted. The hook is secured from below; a sinker must be installed above it so that the spoon rotates freely.
2. Turntables with turbines come in different shapes and types. They are made with 2, 6 and 8 blades that rotate around the base. Petals can be made from any soft material.

Balance baits are a bit like live fish. The balancer is made from a 6-7 cm pipe, to the ends of which hooks are attached. To make a rewinder sensitive and balanced, you need to cast a special mold from plaster, install hooks in it and fill the mold with molten iron. After the material has hardened, you need to treat the surface and paint the bait.

Advantages of homemade floats

Knowing the habits of the fish, the characteristics of the reservoir and the season, you can make a suitable float for winter fishing; a homemade one will surpass any expensive float that can be found in special stores. In addition, you don’t mind losing floats that you made yourself, since most often they are made from cheap parts.

Homemade tackle

There are several types of homemade winter fishing rods with a reel, but the most common are:

1. Filly.
2. Rocker.

The filly fishing rod is popular among fishermen because:

1. It consists of a small number of parts, it is a simple and strong fishing rod for ice fishing.
2. It is easy to transport and prepare for fishing.
3. It is convenient to install such a fishing rod on the edge of the hole, and even if the prey can drag it under water, it will not be possible to carry it to the bottom due to the high buoyancy of the foam.
4. When hooking, it is convenient to hold the tackle even with warm gloves.

The only drawback is the inconvenience of reeling in the fishing rod, since it does not have a reel.

This gear is easy to make yourself:

1. High-quality foam is used for the handle of the fishing rod.
2. You need to make a longitudinal hole on the handle into which the whip will be inserted. This is easy to do with a hot nail.
3. After cleaning the workpiece, you need to start making the legs of the fishing rod. Sewing spools cut in half without thread are suitable for this purpose.

Rocker. Winter fishing mostly brings fishermen small, peaceful fish. Only with the help of a rocker can you catch large prey.

Fishermen use a wire type of gear to catch bream. To produce the structure you need:

1. A piece of wire about 20 cm long.
2. Several templates.

Manufacturing process:

1. You need to draw a drawing of the future equipment on a wooden board with a marker. In places of bending, you need to hammer in nails 3 mm thick.
2. Using the layout, you need to make a structure, providing loops along the edges and in the center of the equipment. Having removed the finished product, all that remains is to remove excess material and shape it with your hands.
3. To equip a finished homemade product for winter fishing with your own hooks, you need to stretch the fishing line through 3 loops. There should be pieces of fishing line left on the outer loops; tie hook No. 5 to each.

Experienced fishermen are confident of success at any time of the year if they have previously made their own fishing gear, taking into account the characteristics of fishing, the type of reservoir and many other factors. There are many secrets to creating your own fishing gear yourself. But you can pay attention to the most popular methods that can be used even by beginners.

Secrets of creating tackle for carp

Carp is one of the most common inhabitants of water bodies in central Russia. In many areas there are fisheries with carp ponds and lakes for paid fishing. But even if you go to their well-maintained shore, an experienced fisherman will definitely take with him the equipment he made himself. These fishing homemade products often become a more reliable guarantee of getting a big catch than the best examples of gear from leading manufacturers.

When performing such “crafts”, the simplest objects present in any private household are used. For example, every expert takes a cunning and careful carp with him when fishing a balalaika I created myself (I will install it). To make it you will need to take:

When assembling such fishing tackle with your own hands, foam is used as a “beacon” showing the place where the tackle is thrown. A fishing line of the required length is attached to it using electrical tape and nylon thread. A sinker is attached to its opposite end. The hook is attached to a sufficiently long leash.

Ideally, fishing homemade products are used, installed in several places. The length of the fishing line and the weight of the load are determined depending on the characteristics of the river bed and bottom of the reservoir, current and other factors.

When going out to fish for carp, various baits can be used. Experienced fishermen call one of the most convenient among them soaked peas. The plastic clamp will allow you to control the bite.

Homemade products for fishing for carp

Another inhabitant of the underwater depths, popular among fans of quiet hunting with a fishing rod, is the carp. Easy-to-make fishing crafts made from available materials will help you outwit and catch it. The easiest option to implement is a float tackle.

To make it you will need to take:

The finished structure is assembled in a few minutes. All its components must be connected with maximum strength. The weight of carp usually reaches 4 kg or more. This strong inhabitant of the underwater depths can easily break the hook or break the gear.

In reservoirs with calm currents it can be installed bottom version of the tackle. You can even use the “trick”, known to everyone since childhood, which has become the prototype of the feeder that is popular these days. To carry out this option, you will need a strong fishing rod, a fishing line, the length of which can reach 100 m, a float and several hooks at once. It is most convenient to use a bell as a bite alarm. Such homemade products help the fisherman become the owner of a significant catch and, without being constantly on the shore, control the gear.

Features of making gear for winter fishing

These types of gear are convenient for fishing in the cold season. In most cases, homemade products for winter fishing provide the fisherman with the opportunity to move away from the place of quiet hunting and control bites due to the sound signal of a bell attached to the surface of the water or hole in the ice.

Many homemade fishing products become an excellent complement to professional devices. For example, it is popular to manufacture additional elements based on the familiar ballpoint pen. Such devices will help improve spinners and jigs.

Empty rods of various colors are used for manufacturing. They are cut into rings and attached to underwater gear. This decor will attract the attention of potential prey. In the winter season, it will additionally attract attention, allowing underwater inhabitants to imagine the opportunity to feast on small fry, rare in winter.

During the cold season, many familiar items come to the aid of the fisherman:

Numerous homemade products for winter fishing are made with your own hands to ensure comfortable fishing from the shore or from the ice next to the hole. It's fun to make these additions yourself.

In conclusion, it is only worth recalling how pleasant this option for spending leisure time in nature is for every fisherman. The preparatory stage of choosing homemade gear turns fishing into an even more interesting hobby. Performing the tackle is accessible to every beginner.

Making fishing tackle with your own hands, as well as fishing itself, is an exciting process. Professional fishermen improve their skills by creating high-quality gear that increases the catch tenfold. In this case, a variety of techniques are used. All available fishing tools will always be individual and unique, since do-it-yourself fishing gear is a purely creative process.

Materials required for work

• Wood (planks or bars). You can cut wobblers or poppers from it.
• Metal plates - suitable for the petals of rotating spinners.
• Various wires for creating fastenings and rings for our baits.

Frequently used tools

• hammer;
• saw;
• sandpaper;
• file;
• primer;
• paints;

Making wobblers

To make a wobbler with your own hands, use hardwood 5 cm long in the form of an oval, narrowed on one side.

1. To begin with, we obtain a workpiece by sawing off a 1.5 cm block from the main board.
2. On the block we draw the outline of the future wobbler fish with a pencil, after which all excess is gradually cut off with a knife.
3. In the front part, as shown in the figure, we first mark it with a pencil, then cut out a cavity for the future blade.
4. The belly is also sawn through the entire length of the wobbler, where we will insert a fastening made of wire, as shown in the figure.
   

   1. It is advisable to use stainless steel wire. 2. If you do not want to use rings to attach tees, take care of inserting them before twisting the wire into the rings.

5. We insert the wire fastening, filling it with epoxy glue.
6. The wobbler is coated with waterproof varnish, and after drying, tees are hung on it.
7. To select the level of buoyancy, lead weights are used, attached to the holes of the abdomen between two loops: nasal and abdominal. Then the wobbler can be sanded and varnished so that its body does not absorb water.
8. Using thin and soft aluminum from drink cans, a blade is created that is glued into the wobbler.

Manufacturing of oscillating spinners (oscillators)

Oscillating spoons or spinner spoons can also be made with your own hands.

For their manufacture use:

• a cross-shaped hammer with balls at the ends and a metal handle;
• wooden boards with a spoon-shaped recess;
• rubberized steel shaft for “rolling” part of the product;
• metal ball;
• drill and drill bits;
• hacksaw for metal;
• steel stylus.

How to make a vibrator petal:

1. Create the desired fixture template on cardboard.
2. Draw a contour using a stylus on a sheet of metal with a given thickness of 1.5 mm.
3. Then the sheet is clamped and the template is cut out with a hacksaw.
4. The workpiece is fixed in the recess of the board, beaten with a hammer, and rolled to strengthen one of the sides of the spoon.
5. Correct with a hammer.
6. Uneven edges are removed and holes are created for factory-type rings.

Spinner spinners

Wire. You need a spinner frame based on rigid stainless steel wire with a length of at least 100 mm. Diameter – 0.8 mm. The bent shape of the wire is straightened using pliers, slings and clamps.

Petal. As a petal, you can use aluminum from 0.33 liter cans. You can even cut the petal with scissors; aluminum is very soft. Holes for inserting the petal onto the main wire are made with a thick needle and pliers.

Assembly of the structure

1. A ring is created at one end of the wire by bending the end of the wire with pliers.
2. Then the bead is put on.
3. Then the petal.
4. Then another bead.

If you want to make your spoon heavier for fishing at depth, use a longer wire and insert a sinker with a hole between steps 4 and 5.

5. A tee is inserted and a ring is created in which this same tee will be. Or you can use small rings, for example, to change a tee to a fly.

Homemade castmaster

Castmaster is made independently based on a metal hollow tube with a cross-section of 16 mm (for example, a spout from a faucet mixer) and lead. The available tools include a hacksaw, a drill, a drill (D 2.5 or 3 mm), a flat file, a vice and a caliper, including the original castmaster model.

The vice is clamped into the pipe, the workpiece is sawed off, the cut angle is made as in the original castmaster and measurements are taken. Holes are drilled exactly in the middle at the ends of the workpiece, and the inside is tinned so that the lead does not fly out during fishing. The holes are sealed with masking tape, after which the workpiece is placed on a flat surface to dry, the remaining cracks are covered with molten tin using an electric soldering iron. If necessary, sandpaper is used and lead is drilled through the holes on the metal tube.

Balancer for winter fishing or vertical fishing

A homemade balancer is a three-dimensional bait in the shape of a real fish. It is created on the basis of alloys and low-melting metal. The hooks are placed in the head or tail of the fish, pointing the sharp end upward. The back and belly have two loops. One for attaching to a fishing line, the other for a tee.

Foam rubber in the shape of a fish

Homemade foam fish bait of domestic know-how. Household sponges of various colors are required. Before processing, moisten and squeeze. Using a blade, the required block of a certain shape is cut - in the form of a fish 3-8 cm in size. Then they are painted with waterproof markers, or not painted; now in stores you can buy sponges for every taste and color.

The jig head is attached without the intervention of glue. And if you want to fix a tee in the fish, you need to make a small cut, insert the tee and seal it with waterproof glue.

Making jigs with your own hands

Homemade jigs are made using casting (lead, lead-tin alloys), soldering (tin and lead alloys), and the instrumental method (tungsten). The latter method cannot be used at home.

You need a form that can be made from plaster poured into matchboxes, and put a jig in the center. After the plaster has dried, remove the jig, clean off any uneven surfaces and cut channels for supplying tin to the hollow area for the future jig.

It must be remembered that lead is a toxic alloy and it is better to smelt it outdoors, or in a special mask, so as not to inhale the fumes.

Homemade sinkers

Sinkers are cast in a similar way to a jig. A lead pouring mold is required.

It is made from a large sinker into which a ring with a small cut is soldered, as shown in the figure. This cut will allow you to insert the line of your tackle without breaking the tackle. And it is advisable to use a strong fishing line for unhooking, you can use a braided cord or nylon thread.

Electronic bite alarms

To create a homemade electronic bite alarm, you need an electronic and bite alarm (in the form of a bright plastic barrel with a latch) alarms, which have a mount on the rod and a bicycle spoke. A knitting needle is attached to the signaling roller, and a barrel is attached to it on the other side. This structure is attached to the rod stand.

Artificial baits (baits)

For fishing with a float rod, artificial baits simulating worms and maggots are sometimes used. These baits need to smell appropriate, so take care to wet the bait with a very small amount of scent. For example: garlic drops, anise, vanilla.

When there are no baits for fishing, professional fishermen use artificial baits:

• wet and dry flies based on wool, feathers, colored threads;
• bugs based on cork or foam;
• "goat beard"

Let's sum it up

When making fishing tackle, you can use any available means. And there can be a great many variations of baits and equipment. It is not at all necessary to do as others do and as described in the manuals. The main thing is to understand what the final product is, and then come up with an alternative solution for making a similar bait.