Making your own gear for winter and summer fishing. Do-it-yourself fishing gear Useful things for do-it-yourself winter fishing

Making fishing tackle with your own hands, as well as fishing itself, is an exciting process. Professional fishermen improve their skills by creating high-quality gear that increases the catch tenfold. In this case, a variety of techniques are used. All available fishing tools will always be individual and unique, since do-it-yourself fishing gear is a purely creative process.

Materials required for work

• Wood (planks or bars). You can cut wobblers or poppers from it.
• Metal plates - suitable for the petals of rotating spinners.
• Various wires for creating fastenings and rings for our baits.

Frequently used tools

• hammer;
• saw;
• sandpaper;
• file;
• primer;
• paints;

Making wobblers

To make a wobbler with your own hands, use hardwood 5 cm long in the form of an oval, narrowed on one side.

1. To begin with, we obtain a workpiece by sawing off a 1.5 cm block from the main board.
2. On the block we draw the outline of the future wobbler fish with a pencil, after which all excess is gradually cut off with a knife.
3. In the front part, as shown in the figure, we first mark it with a pencil, then cut out a cavity for the future blade.
4. The belly is also sawn through the entire length of the wobbler, where we will insert a fastening made of wire, as shown in the figure.
   

   1. It is advisable to use stainless steel wire. 2. If you do not want to use rings to attach tees, take care of inserting them before twisting the wire into the rings.

5. We insert the wire fastening, filling it with epoxy glue.
6. The wobbler is coated with waterproof varnish, and after drying, tees are hung on it.
7. To select the level of buoyancy, lead weights are used, attached to the holes of the abdomen between two loops: nasal and abdominal. Then the wobbler can be sanded and varnished so that its body does not absorb water.
8. Using thin and soft aluminum from drink cans, a blade is created that is glued into the wobbler.

Manufacturing of oscillating spinners (oscillators)

Oscillating spoons or spinner spoons can also be made with your own hands.

For their manufacture use:

• a cross-shaped hammer with balls at the ends and a metal handle;
• wooden boards with a spoon-shaped recess;
• rubberized steel shaft for “rolling” part of the product;
• metal ball;
• drill and drill bits;
• hacksaw for metal;
• steel stylus.

How to make a vibrator petal:

1. Create the desired fixture template on cardboard.
2. Draw a contour using a stylus on a sheet of metal with a given thickness of 1.5 mm.
3. Then the sheet is clamped and the template is cut out with a hacksaw.
4. The workpiece is fixed in the recess of the board, beaten with a hammer, and rolled to strengthen one of the sides of the spoon.
5. Correct with a hammer.
6. Uneven edges are removed and holes are created for factory-type rings.

Spinner spinners

Wire. You need a spinner frame based on rigid stainless steel wire with a length of at least 100 mm. Diameter – 0.8 mm. The bent shape of the wire is straightened using pliers, slings and clamps.

Petal. As a petal, you can use aluminum from 0.33 liter cans. You can even cut the petal with scissors; aluminum is very soft. Holes for inserting the petal onto the main wire are made with a thick needle and pliers.

Assembly of the structure

1. A ring is created at one end of the wire by bending the end of the wire with pliers.
2. Then the bead is put on.
3. Then the petal.
4. Then another bead.

If you want to make your spoon heavier for fishing at depth, use a longer wire and insert a sinker with a hole between steps 4 and 5.

5. A tee is inserted and a ring is created in which this same tee will be. Or you can use small rings, for example, to change a tee to a fly.

Homemade castmaster

Castmaster is made independently based on a metal hollow tube with a cross-section of 16 mm (for example, a spout from a faucet mixer) and lead. The available tools include a hacksaw, a drill, a drill (D 2.5 or 3 mm), a flat file, a vice and a caliper, including the original castmaster model.

The vice is clamped into the pipe, the workpiece is sawed off, the cut angle is made as in the original castmaster and measurements are taken. Holes are drilled exactly in the middle at the ends of the workpiece, and the inside is tinned so that the lead does not fly out during fishing. The holes are sealed with masking tape, after which the workpiece is placed on a flat surface to dry, the remaining cracks are covered with molten tin using an electric soldering iron. If necessary, sandpaper is used and lead is drilled through the holes on the metal tube.

Balancer for winter fishing or vertical fishing

A homemade balancer is a three-dimensional bait in the shape of a real fish. It is created on the basis of alloys and low-melting metal. The hooks are placed in the head or tail of the fish, pointing the sharp end upward. The back and belly have two loops. One for attaching to a fishing line, the other for a tee.

Foam rubber in the shape of a fish

Homemade foam fish bait of domestic know-how. Household sponges of various colors are required. Before processing, moisten and squeeze. Using a blade, the required block of a certain shape is cut - in the form of a fish 3-8 cm in size. Then they are painted with waterproof markers, or not painted; now in stores you can buy sponges for every taste and color.

The jig head is attached without the intervention of glue. And if you want to fix a tee in the fish, you need to make a small cut, insert the tee and seal it with waterproof glue.

Making jigs with your own hands

Homemade jigs are made using casting (lead, lead-tin alloys), soldering (tin and lead alloys), and the instrumental method (tungsten). The latter method cannot be used at home.

You need a form that can be made from plaster poured into matchboxes, and put a jig in the center. After the plaster has dried, remove the jig, clean off any uneven surfaces and cut channels for supplying tin to the hollow area for the future jig.

It must be remembered that lead is a toxic alloy and it is better to smelt it outdoors, or in a special mask, so as not to inhale the fumes.

Homemade sinkers

Sinkers are cast by analogy with a jig. A lead pouring mold is required.

It is made from a large sinker into which a ring with a small cut is soldered, as shown in the figure. This cut will allow you to insert the line of your tackle without breaking the tackle. And it is advisable to use a strong fishing line for unhooking, you can use a braided cord or nylon thread.

Electronic bite alarms

To create a homemade electronic bite alarm, you need an electronic and bite alarm (in the form of a bright plastic barrel with a latch) alarms, which have a mount on the rod and a bicycle spoke. A knitting needle is attached to the signaling roller, and a barrel is attached to it on the other side. This structure is attached to the rod stand.

Artificial baits (baits)

For fishing with a float rod, artificial baits simulating worms and maggots are sometimes used. These baits need to smell appropriate, so take care to wet the bait with a very small amount of scent. For example: garlic drops, anise, vanilla.

When there are no baits for fishing, professional fishermen use artificial baits:

• wet and dry flies based on wool, feathers, colored threads;
• bugs based on cork or foam;
• "goat beard"

Let's sum it up

When making fishing gear, you can use any available means. And there can be a great many variations of baits and equipment. It is not at all necessary to do as others do and as described in the manuals. The main thing is to understand what the final product is, and then come up with an alternative solution for making a similar bait.

Many fishermen devote all their free time to their favorite pastime, looking for any way to go fishing as quickly as possible. And while some cannot imagine life without store-bought tackle and bait, others constantly make fishing tackle with their own hands, claiming that they are no less effective than store-bought products. The main thing is that they are made correctly.

DIY silicone baits

A variety of artificial baits are used for fishing with spinning tackle. Particularly popular are silicone products, which create a high-quality imitation of the behavior of live fish and attract predators well. However, such baits are subject to wear and tear, so with prolonged use, contact with ferocious fish or other mechanical stress, they lose their appearance and are no longer suitable for further fishing. But is there any point in throwing them away after that? Of course not. After all, if you put together several silicones, you can use them to create new, quite attractive attachments.

So, the step-by-step guide for recycling old silicone products is as follows:

Making wobblers at home

Also, many fishermen know how to make homemade wobblers for pike with their own hands, saving themselves from the high costs of purchasing expensive store-bought models. The process itself looks very fun and simple, because it does not require the use of special equipment or tools.

If you are going to make a wobbler, follow these instructions:

Homemade spoons for pike and perch

Another irreplaceable fishing accessory is a spoon. There are two popular varieties of these lures - rotating and oscillating. The first type is very easy to make, provided that you have minimal skills in working with tools and materials . During the manufacturing process it is necessary to apply:

• An ordinary paper clip.
• Tee.
• A metal plate, 0.5−1 mm thick.
• A tiny bead.
• A piece of sheet lead.
• File, needle files, scissors and pliers.

At the beginning of the work, the shape of a petal for the future bait is drawn on a piece of cardboard, after which the drawing is transferred to the metal. You need to take scissors and carefully cut the petal from a metal blank, after which it should be carefully processed with a file to prevent the appearance of burrs and other defects. Two holes are made along the edges of the petal (one on each edge), and a file is also processed. Places where there are holes can be bent 90 degrees relative to the petal. Next, all that remains is to take the wire and straighten it, and at one end form a loop and install a treble hook.

Then you need to put a petal and a bead on the same wire, and then again form a loop for attaching the fishing line. Moreover, it is important to again make a loop on which the fishing line will be attached so that it does not interfere with the free rotation of the petal.

In order for a homemade bait to work well enough, it must be properly configured using the additional loading method. A lead weight should be installed between the tee and the petal, calculating everything with great care. At the last stage of making the spinner, all that remains is to give it the required color.

Not a secret that to cast the tackle over a long distance from your own location, as well as to reliably immerse the tackle to depth, it is necessary to use a suitable sinker. And although in some cases fishermen use any metal objects with the appropriate weight, if you approach the issue of making a sinker correctly, this will increase the chances of successful fishing in any conditions.

The following requirements apply to a quality sinker:

• It must be heavy, so it is preferable to choose lead as the base, which has the highest density among all other materials available to the average fisherman.
• It must have a streamlined shape with a perfectly smooth surface, because when casting, the sinker succumbs to aerodynamic forces, and any roughness disrupts the flight range.
• It must have a reliable fixation point with the fishing line.
• It should remain invisible so as not to cause increased caution in the fish.
• It must be accessible.

Making a fishing sinker with your own hands is not difficult.

Many experienced anglers cast a lead sinker in an aluminum spoon. To do this you should take:

First you need to place the selected vessel for smelting on a burner or fire, and then place small lead there. After waiting for the metal to melt, it should be placed in a spoon. After the material hardens, it can be separated from the aluminum surface of the spoon and used as a sinker.

Creating a live bait trap

Not a secret, that the issue of storing live bait for spinning pike fishing worries many fishermen. And if in spring or autumn live bait remains viable for a long time and remains mobile, then in summer they can die in a couple of hours. But catching new ones may take too much time, and the fisherman does not always have the appropriate gear with him. However, if you make a simple and uncomplicated device from two plastic bottles, the problem will automatically disappear.

Step by step guide to making a trap:

1. So, first you need to take a two-liter bottle and cut off its neck. Then, on the same side, you need to cut off the neck in a wide part, which will allow you to get a part that resembles a watering can. The bottom of this bottle is still cut off.
2. We take the second bottle and cut off its bottom, at a distance of 5-7 cm from the maximum thickness.
3. Next, the structure should be assembled by inserting the cut “watering can” back, but now in the opposite way, placing the thinnest section inside. As a result, the structure is connected to each other with artificial threads.
4. A weight and rope should be attached to the trap.

To test the device in real conditions, you need to place bait in it and lower it to the bottom of the reservoir where fishing takes place. Small fish will immediately become interested in an attractive bait and try to eat it. Once she is trapped, there is no way back. Now, when you need to find live bait, it will always be there.

How to make a zherlitsa with your own hands

For winter fishing for predatory fish, in particular pike, as well as large pike perch, it is customary to use a jig and a popular tackle - a girder. And although it was invented a long time ago, many experienced and novice fishermen are constantly interested in making such a tool with their own hands. In fact, it is easy to make a vent, because its design remains simple and uncomplicated.

As the basis for future gear, a sewer PVC pipe 32 millimeters thick is used, which should be divided into 10-15 cm sections. Any unevenness and external defects can be smoothed out with a file.

Then three holes should be made in the pipe: two are made on one side, one against the other, which is necessary to fix the tripod, and one on the reverse side, where it will act as a line stopper.

The stopper is formed in the shape of the letter “P”, and it should not interfere with the free movement of the fishing line. Then you need to create a ring of fishing line with a diameter of 0.4-0.5 millimeters. Its purpose is to attach the girder to a metal rod that will be driven into the ice. Also, up to 10 meters of fishing line is wound around a piece of pipe, to the end of which a weight and a hook, preferably a tee, are attached.

Homemade baits for crucian carp

In addition to gear and other important devices, many fishermen create effective bait for fish. It is no secret that for each underwater inhabitant it is necessary to select the appropriate bait composition. Otherwise, the desired trophy will simply ignore the offered bait and go deeper.

If we talk about catching crucian carp, then to increase the efficiency of the upcoming fishing, you can use a unique product based on semolina, which should be prepared according to a special recipe.

So, first you need to pour water into a container and add a few drops of flavoring, and then put it on the fire and bring to a boil. Semolina is placed in boiling water and constantly stirred until a homogeneous thick mass is formed. Then the fire is turned off, and the porridge is moved to the appropriate place to cool and steam. As soon as it reaches room temperature, you can begin to knead it with your hands, which will increase its density. Then the porridge is wrapped in several layers of gauze, but not with polyethylene. Based on this mixture, balls are created and placed on a hook.

In addition to the above instructions for making fishing devices, there are many others that are amazing in their effectiveness and ease of installation. Therefore, if you do not want to support someone else's business, and believe that homemade baits and tackle can be effective for any fishing conditions, continue to look for instructions and ways to create such products from available materials.

Attention, TODAY only!

Fishing has long ceased to be a simple entertainment and hobby; for many men, this is the time when they can relax, take a break from problems and focus on a complex but interesting process, and homemade fishing tools for summer fishing will help with this. Therefore, there are a great many ways to fish, as well as varieties of fishing tackle, everyone selects them to suit their own needs, and some even create several home-made fishing products for summer fishing. This could be a simple hand-made wooden stick with fishing line and worms, or a high-tech novelty, complemented by your own spinners and modern baits for predatory fish.

• Types of homemade products
• Spoon
• Float

And it doesn’t matter how you prefer to fish: the old fashioned way or using modern gadgets - a homemade fishing device for summer fishing will help you adjust a ready-made device to your requirements. Since ancient times, fishermen had to make everything themselves, and even in the modern world, many experienced people prefer to rely on equipment they created themselves, which will never fail, unlike purchased ones.

This practice is common because factory production is set up to create crafts that will suit as many situations as possible, and with rare exceptions they do not take into account many details.

So, what can you do yourself to make summer fishing easier if you are new to this activity?
No matter how developed your imagination is and no matter how varied your DIY fishing gear may look, they can still be classified into one of 8 main types:

• a spoon is one of the most necessary things when fishing on a river;
• feeder - helps you not to bother with additional feeding;
• A float is the main gear that will help you understand whether the fish has eaten the bait along with the hook. Some experienced fishermen prefer to get rid of floats and follow the movement of the line, but this requires many years of training and not everyone can master this style;
• mugs or otherwise called zherlitsy;
• fishing rods are the main component, and with proper skill you can make your own fishing rod. They also have many varieties;
• equipment - various additions to the fishing rod that simplify fishing and change it to suit the needs of the environment;
• nods - help to more accurately recognize the catch;
• homemade boats - their creation requires experience in woodworking and carpentry, but they can also be made from polymers.

With rare exceptions, almost all fishing homemade products fall under this type, and if you miss fishing rods and boats that are difficult to implement, then you can make most of the other gear yourself.

A very common and indispensable equipment when hunting predatory fish:

1. Thanks to vibrations due to the flow of the river or the movement of the fishing rod, it allows you to imitate fish or other small animals.

2. Easy to manufacture and use.

It is most convenient to use them in conjunction with a spinning rod, and these are the simplest fishing homemade products that anyone can do. In order to make homemade spinners, it is enough to make “petals”, which are cut out of metal according to pre-marked templates. After that, several holes are drilled in such a part, and it itself is bent at a right angle so that the first and second holes are on the same straight line. Next, this entire structure is attached to the main fishing line in a simple way.
You can experiment with templates from the Internet or create your own, but to make the work easier, it is better to use ductile metals that are not subject to rapid oxidation.

Float

It is impossible to imagine modern fishing without a float; it has become a kind of symbol of fishing and is displayed on signs in specialized stores.

Most beginners think that this gear has a couple of trivial functions:

• hook support at a given depth;
• bite signal.

In reality, everything is completely different, and, depending on modifications, this simple equipment can perform dozens of different functions. If we talk about the design, then it is a simple “stick” attached to a fishing line, the lower part of which is in the water, and the upper part is above it and should record the movements of the hook. This base can be supplemented in a variety of ways, as evidenced by the many varieties of floats, and each fits its own individual situation, performing specific tasks.

Creating a float at home is accessible to anyone, because its main characteristic is its density is lower than that of water. Therefore, for the base, you can use any container with air that will allow the homemade product to float, so that it does not turn over from side to side, you need to install a keel or weight on one side, in simple terms. Attach a signal antenna on top, which should be drawn out in advance. Next, all that remains is to find a metal ring or rubber band that will allow you to attach it all to the fishing line and your homemade float is ready!

Here on one page you can find fishing crafts made from simple materials. The production and main characteristics are shown in the video; catchability is tested in reservoir conditions. There is no doubt that the catch will increase significantly if you apply these little tricks to your fishing practice.

We advise you to take a closer look at the invention of Sergei Makarov’s homemade fishing craft. This is a lollipop stick. In practice it turned out to be an excellent extractor. The meaning of manufacturing lies in one manipulation. At the beginning of the tube we make a small slit with a hacksaw for metal. Extractor is almost ready. What is it for? When fishing, especially in the spring, the fish behave actively. I use small hooks and get some problems. The hook goes very deep. You have to do manipulations with the fish that neither you nor the fish enjoy. And this little homemade tool helps out. The line starts cutting. It turns slightly so that there is no reverse motion. It is buried, put on the shank of the hook, and pushed out. This way the hook can be easily released. In another article - a store option.

Mormyshka ant - homemade fishing

Recommendation from personal experience. The guard used by fisherman Igor Kazantsev is made of a spring. For herself, she chooses bright colors, such as yellow or green. Especially in cloudy weather it is good when the color is yellow. It is noticeable on the hole. Less irritating to the retina. We use ten fishing line. A few words about the jig that is in the review. This is a classic executed ant. This fishing homemade product belongs to the category of universal attachments. You can fish with it either looking at it or without it. The jig configuration must be correctly constructed. For her to play. There are some that look like ants. Especially in its shape. But there is one note: the hole into which the fishing line goes is made from the very top of the ant. This gives the action needed for this class of jig. Why can this be a baitless tackle? Putting a yellow bead or another cambric of the same color on it, for perch, which often bites on a reelless jig, this combination is an irritant. He can't resist taking the jig.

Another homemade fishing craft: tackle for perch

Let's imagine such a situation. You are on a boat. Depth approximately 1.5 meters. There will be grass all around, as usual, with windows and corridors. You have the full feeling that a perch is grazing in this grass. This is exactly the situation the fisherman found himself in. I was right in my premonitions, there was a perch there, but it was almost impossible to catch with a spinning rod. There are four hooks for five casts. It is impossible to drag a spinner through the grass. He returned home and invented a new tackle. When I appeared in these lands for the second time, I caught 4.7 kg of perch in these lands. Let's try to collect it.

You will see what you need for this as you make it by hand. This operation is simple and everyone knows it. After casting, the workpiece is processed with a hammer and file and acquires a marketable appearance. Of course, you can buy a jig head, but in this case where to put unnecessary hooks and, most importantly, free time. Now we cut out the fish from the back and give it the appearance of a fry. The fish glued to the hook can be coated with nail polish. If you want to make the tackle durable, coat it with epoxy. The final touch is attaching the spinner. A small yellow petal along with a supporting bead is attached to the fishing line. We pierce the tackle and tie the fishing line to the hook. Look at the video to see how the finished perch tackle behaves in the water.

Making a homemade balancer by hand

I decided to start making a balancer at home as an experiment. I took the simplest route. The basis for production was the classic version of a winter spinner for catching perch. On this base I made something similar, somewhat different in appearance from traditional balancers used for fishing. Judging by the tests carried out, there was an effect. The fish always has the final say in determining the quality of the bait. During testing, I encountered a combination of many weather conditions that were unsuitable for optimal fishing. As a result, the bite is very sluggish. But this bait brought several fish. There is hope that he will bring more.

It is based on an ordinary perch spoon. I did not fill it with solder very much in order to achieve the gliding properties of the lower part of the homemade fishing catch. I firmly placed hooks on both sides. I did not install a tail, as is used in most balancers. Made it easier. A rigid propylene brush that gives the ability to plan. Added some red wool. Fasteners: I made a bandage and coated it with glue, making a movable mount. Options for sizes and some details are possible. The most interesting thing is that the fisherman came to the conclusion that almost all spinners for vertical fishing become horizontal with a small operation. The only caveat: round-shaped spinners are not suitable for conversion into horizontal ones. They have a certain mass and weakly expressed properties for planning. This is necessary for horizontal movement of the spoon. We must first find the center of gravity. Make a mark. They let me make a through hole. The master went a little further to secure the loop. In this model, place a suspended double in place of the fishing line attachment in the traditional spinner shape. It acts as a tail.

Homemade fishing rod - fishing rod for rudd

What should tired spinners do when they are not very lucky? There is a lifesaver. Fishermen have been using this for many years. Regular fishing takes place in swampy areas. That is, grass, reeds. Rudd and other fish that are present in such reservoirs are caught. This is a rather primitive fisherman's homemade product. Any jig in color and shape can be used. The most important thing is that there is a long fore-end. There is a second manufacturing option. It is advisable that the float does not have an antenna. Fishing takes place directly in the thick of the grass. When fishing for fish, the antenna very often catches the grass. Sometimes the tackle is even lost. The float is preferably dim. Fishing occurs at a depth of 20-40 cm.

Where is the best place to catch rudd? On the bays there is a wall of reeds and clean water closely adjacent to it. Depth one meter or more. She doesn't change. It is advisable to throw the jig as tightly as possible to the reed wall. The bites are such that the float does not flood, since the fish is riding. It is better to use maggots as bait. It sits more securely on the hook, but the worm constantly breaks off.

For a professional fisherman, making fishing tackle with your own hands is an activity that brings the same pleasure as fishing. By creating new gear, feeders, baits and other devices, a fisherman can increase the fish catch several times. For making tackle at home, improvised means and tools are excellent.

Making fishing tackle is a fascinating activity.

1. Wood. From wood, a fisherman may need planks and bars. The wood is excellent for wobblers and poppers.
2. Metal plates. Petals for spinners can be made from this material.
3. Wire. Can be used as mounts and rings for baits.
4. Hammer.
5. Saw.
6. Sandpaper.
7. File.
8. Materials for covering tackle and other devices (varnish, paint).

To make a fishing device with your own hands, it is enough to have available tools and materials.

Helicopter tackle is a popular winter tackle.

1. Hard spinner.
2. Long leash.
3. Short leash with hooks.
4. Retaining ring.
5. Sliding sinker.
6. Main line.
7. Fixing cambric.
8. Reel, necessary for attaching all the gear.
9. Bite alarm.

Making fishing gear is very simple. Helicopter gear is made from tin. Thin tin cans are perfect.

The diameter of the pinwheel reaches five centimeters and it is attached to a leash, the length of which is one and a half meters, and the diameter is 0.22-0.25 millimeters.

Four short leashes of 15 centimeters each, 0.15-0.2 millimeters wide, are mounted to the long leash. Fastening can be done using a swivel. Place hooks on leashes. The leashes are attached at the same distance from each other.

The leashes are attached to the main line with a diameter of up to 0.45 millimeters with a locking ring. A flat weight weighing up to 80 grams is mounted on the fishing line.

Place a cambric up to four centimeters long and up to half a centimeter in diameter just above the load. The cambric fixes the fishing line on the whip, which notifies the fisherman about a bite.

Willow branches are placed under the whip, which can be collected on the river along the shore.
Before fishing with a helicopter, the fisherman must drill a hole in the direction of the current at an angle.

• a pre-bent pinwheel is passed into the hole. It is necessary to bend it so that it plays better in the water and has resistance to fast flow;
• the bait is placed on the hooks, and the assembled tackle is lowered completely into the water;
• after reaching the bottom load, the cambric should be pulled and secured at the end of the whip, which should be located at the hole;
• the excess fishing line is wound on the reel. It should be next to the whip.

Having made a helicopter with his own hands, a fisherman will be able to fish constantly in winter and catch big fish.

To make a wobbler yourself, you should take wood from deciduous trees. The optimal length of oval wood is five centimeters.

1. A one and a half centimeter block should be cut from the wood.
2. Draw a wobbler fish on the resulting block.
3. Trim the excess wood along the contour with a knife.
4. Make a mark with a pencil in the front part of the future wobbler, and then cut out a cavity to create a blade. Cut the belly along the length of the bait. A fastener made of stainless wire will be inserted into this place.
5. Insert wire in the form of rings into the intended place and fill with epoxy glue.
6. Apply varnish to the finished wobbler. Once the varnish has dried, hang treble hooks on the workpiece.
7. Adjustment of the level of buoyancy must be done using lead weights, which are attached to the holes in the abdomen between the nasal and abdominal loops.
8. Sand the bait and re-varnish it with a waterproof effect.
9. Next, prepare a blade from aluminum cans, which should be glued into the wobbler.

By following the instructions for making a wobbler, you can get an excellent specimen, which will later be used to equip a fishing rod.

DIY mandula

How to assemble a mandula? You can make a mandula from polyurethane foam. The material is obtained from various rugs and women's slippers. Mandula is great for pike perch fishing.
For the mandula you will need multi-colored polyurethane foam, double or triple hooks, wire 0.5-0.7 mm wide, a cotton swab, red wool, pliers, pliers, wire cutters, an awl, highly water-resistant glue, and a knife.

• cut polyurethane foam into cubes;
• stack the cubes on top of each other and coat the layers with glue;
• burn the center of the structure with a hot awl;
• the structure should be made cone-shaped using a knife. The awl should remain in the plates;
• a cotton swab is mounted in one of the cones;
• Take the pliers and make a loop at the end of the wire. The other end is attached to the hook;
• the prepared cone is placed on the hook;
• A fly is tied from red wool with glue. While the product is drying, a polyurethane foam plate is put on the second hook to make it more buoyant;
• all structures must be assembled together by twisting wire.

It is possible to make a mandula from polyurethane foam. With such equipment it is excellent to catch a predator.

Such baits are also called spoons. To make a spinner, you will need a cross-shaped hammer with balls at the end, a wooden board with a recess in the middle, a rubberized steel shaft, a metal ball, a drill, a hacksaw, and a steel stylus.

1. Make a petal template on cardboard.
2. Make a contour on a one and a half millimeter sheet of metal using a stylus according to the template.
3. Clamp the sheet and cut out the petal according to the template with a hacksaw.
4. Fix the workpiece in the recess of the board.
5. Remove uneven areas along the edges and make holes for the rings.

Manual vibrators are made of metal and wood. The simple design will allow you to catch excellent fish.

Making a spinner spoon

The spinner frame is made of stainless steel wire. Its length must be at least one hundred millimeters and its diameter 0.8 millimeters.

1. The curvature of the wire is removed with pliers, slings or chawls.
2. The petal is made from 0.33 liter aluminum cans. Due to the softness of aluminum, it can be cut with scissors.
3. Make holes on the wire with a thick needle to secure the petals.
4. Assembly. One end of the wire is twisted into a ring with pliers. Then a bead and a petal are put on. The structure is secured with another bead.

You can increase the weight of the spinner by choosing a long wire, as well as using a sinker with a hole.

It is better to make a spinner out of wire. It is subsequently weighted with a sinker.

To make a castmaster you will need an empty metal pipe with a cross-section of sixteen millimeters and lead.

The tools you will need are a hacksaw, a drill, a drill up to three millimeters, a file, a vice, a caliper, and a soldering iron.

• the pipe is clamped into a jaw and the workpiece is sawed off. The cutting angle must correspond to the original castmaster and measurement angle;
• make holes in the centers of both ends of the workpiece;
• tin the workpiece from the inside so that the lead does not fall out;
• seal the holes with masking tape and let it dry;
• Close the remaining holes with molten tin. To carry out this stage you will need a soldering iron;
• process with sandpaper and drill lead through the holes in the pipe.

A castmaster is made from a small hollow tube. You should work with lead carefully, as it emits fumes that are harmful to health.

DIY balancer

Such a balancer may be needed when fishing in winter. It looks like a voluminous bait that looks like a fish.

1. It is created from light metal alloys.
2. The hooks are attached to the head or tail of the workpiece, the sharp end should point upward.
3. Two loops are attached to the back and belly of the bait. The first is necessary for the fishing line, and the second for the threesome.

A balancer is a piece of equipment that looks like a fish and is used in winter. Homemade balancers guarantee a good catch.

Foam rubber is prepared in the form of fish from foam rubber sponges of different colors.

• Before starting work, you should wet and squeeze out the sponge;
• then a fish measuring 3-8 centimeters is cut out;
• can be attached to jigs without glue;
• If you want to attach a treble hook to the bait, you need to make a cut, and then insert the hook and secure it with water-repellent glue.

To make your own accessories, you may also need a dishwashing sponge. It is used to make foam fish that can attract a large school of fish.

Mormyshki at home

For jigs you will need lead or lead-tin alloys and gypsum. You should prepare the jig in the fresh air or wearing a mask, as lead is toxic.

1. Create a plaster mold. Pour plaster into a matchbox and place a jig in the middle.
2. After the plaster has dried, the jig is removed. The mold is cleaned and channels are created for pouring tin.

The jig is the simplest bait that is very easy to make yourself. It is necessary to prepare plaster and mold.

DIY bite alarms

To create an electronic signaling device, you will need a bicycle spoke, an electronic and bite signaling device with a rod mount.

1. Attach the spoke to the signal roller.
2. On the other side, a barrel is secured.
3. The resulting alarm is mounted on the rod stand.

You can also make bite alarms yourself. The basis is a bicycle spoke and a commercial signaling device.

To catch fish with a float rod, artificial baits are required that imitate crustaceans, worms, and maggots.

• anise;
• vanilla;
• garlic.

As bait, you can use wet and dry flies made from wool, feathers, cork, polystyrene foam, and colored threads.

To prepare fishing tackle at home, it is enough to use available materials: wooden blocks, polystyrene foam, wool, feathers, threads, and so on. Before making homemade products, you should understand what it will look like in the future and what kind of fish can be caught with it. Properly made tackle will help the angler catch a great catch.